To renew your electrical certificate. Fee varies depending on renewal type.

This affidavit is used to record the hours of a trainee's electrical experience with direct supervision under a Washington certified journeyman, master or specialty electrician.

This the application for an Electrical Training Certificate or the renewal of. (This does NOT make you a registered apprentice).

Covers 03A, 06B, 07A, 07B, 07C, 07D, 07E, and 10 specialty licenses.

Used by an Engineer to apply for accreditation by L&I to approve unlisted equipment.

This is the form you would complete to register as a construction conractor.

Application and instructions for a Washington State electrician's certificate examination.

Use this form to apply for the master electrician exam.

To assign or unassign your status as an administrator or master.

Safety Standards for Electrical Workers, 296-45 WAC, consist of the requirements for safeguarding employees against electrical hazards in their workplace; requirements for electric equipment and wiring in locations classified as hazardous.

Class B Book Refund Request Form for the purpose of requesting a refund of Class B Books purchased prior to March 1, 2013.

Fact Sheet: Explains Class B label electrical work, scope and limitations, and provides general instructions for using Class B labels.

This application is used to apply for a valid electrical permit from L&I. 4 pages.

Used to get approval of a course as an electrical continuing education class. This application must be received by L&I at least 30 days before the course is offered.

Electrical Safety Standards,Administration, and Installation WAC 296-46B

This chapter applies to powered industrial trucks, electric motors or internal combustion engines, fork trucks, forklifts, tractors, platform lift trucks, motorized hand trucks and other specialized industrial trucks.

A form to request a refund for an electrical work permit, elevator permit, or factory-assembled structure alteration permit.

This application is used to apply for a valid electrical permit. 5 pages.

To request a duplicate or replacement of your Washington state electrical license or certificate.

Used to deposit money into your L&I account (Electrical).

Affidavit of experience to apply for cetification as a Amusement Ride Inspector.

Used by non-L&I agencies and jurisdictional authorities to request an inspection on an electrical hazard.

Flier: Describes when facility operators/owners qualify for an annual electrical permit.

Required if 3A, 6B, 7A, 7B, 7C, 7D, 7E, or 10 and have not completed the modified training requirements to receive specialty electrician cerfitication.

Application to be certified as an amusement ride inspector.

To apply for a decal for an amusement ride or air supported structure.

EXAMPLE ONLY: Example of an application to apply for an apprenticeship. Registered Apprenticeship Programs use their own forms. NOT TO BE USED TO REQUEST PLUMBER or ELECTRICAL TRAINEE CARD.

Application used to get an electrical contractors license

Used for creating combination electrical and plumbing contractors license

Application and instructions for the specialty electrician certificate for 03A, 06B, 07A, 07B, 07C, 07D, 07E and 10. Eligibility granted through modified supervision requirements of RCW 19.28.191(1)(g)(ii)

Application used to get an telecommunications contractors license.

To establish a contractor deposit account by an electrical contactor or registered construction contractors who are legally required to purchase electrical work permits from L&I.

To request access to L&I's EPIS - Miscellaneous Accounts

Use to establish a factory assembled structure (FAS) deposit account. FAS deposit accounts are for businesses or other entities that are not currently licensed or registered with L&I as electrical or construction contractors but are legally required to purchase work permits from L&I. (3 pgs)

Fact Sheet: Explains work that is allowed and not allowed under (04) Sign Scope of Work and what electrical sign contractors and electricians should know before doing sign work. Also covers electrical Class B labels and electrical permits, inspections and fees.

Simplified version of the Chapter 19.28 RCW - Electricians and Electrical Installations Rules

This checklist is generic in content and may not include all requirements for your particular installation. The manufacturer's installation instruction must be adhered to and available to the inspector at the time of the inspection.

This form is used to notify you that your license will expire and for you to use to renew your license.

An application to receive approval from L&I to instruct electrical continuing education courses.

Used to gather information from a person who was a witness to electrical work that is being investigated by L&I.

To apply for a variance which is an allowable deviation from specific requirements of a National Electrical Code section, or the WAC 296-46B where the proposed alternate methods will maintain equivalent safety.

Used by the manufacturer to request approval from L&I on an eletrical plan to build factory-built structures or commercial coaches.

Fact Sheet: Provides information for requesting electrical inspections, including telephone numbers and locations of L&I offices that handle electrical inspections.

Pamphlet/Booklet: Provides information to help consumers properly handle electrical equipment and appliances, know the required permits and inspections for electrical work, and verify licenses and certifications before having electrical work performed.

Electrical Telecommunication Principal Member Owner Update Request

Fact Sheet: Explains to commercial property owners the importance of electrical permits, inspections and approvals. An electrical permit is required for most new, remodel and maintenance electrical work.

Fact Sheet: Explains to property owners the importance of electrical permits, inspections and approvals. An electrical permit is required for most new, remodel and maintenance electrical work.

This is used to assign ownership interest to a savings account that is held by L&I for one year after a contractor's license has expired or after the contractor ceases business in Washington State.

Used to show proof of a bond in the State of Washington.

Instructions for filing suit against an electrical contractor

Fact sheet: Explains that an electrical permit and inspection are required for most new, remodel, and maintenance electrical work. Provides information specific to the installation of green power generation systems.

Fact sheet: Provides information about getting a trainee card and outlines the electrical training and experience required to be certified as an electrician in Washington State.

To notify L&I on any electrical work that you think is illegal.

Fact Sheet: Describes the online services available from L&I's Electrical Program, including URLs for different topics covered on the Web, how to sign up for the Electrical listserv (to receive updates by e-mail), and how to sign up for the monthly e-newsletter, also provided by e-mail.

Fact Sheet: Answers questions about training and certification/licensing requirements for those who perform electrical installations, and electrical work that requires a permit and inspection.

A reassignment is permitted only when (1) the Electrical Contractor (assignor) changes the name of the business; (2) the Electrical Contractor transfers the funds to a new account; or (3) the financial institution changes the account number.

Used by electrical licensee to notify L&I of an address change.

This form is to be used to purchase the CD ROM of registered construction contractors, registered electrical contractors, plumbers and electricians.

This temporary license is limited to the mechanical and electrical operation, construction, installation, alteration, maintenance, inspection, relocation and repair of conveyances.