Obtenga un formulario o publicación

Escriba todo el título del documento o una parte, la descripción o el número:     

Formularios más populares  |  Carteles requeridos del lugar de trabajo  |  Formularios y publicaciones en español


Resultados para: inspector
Vea:    Ordenar por:       
Título/Descripción:

Búsqueda de palabras clave:  
Tipo:

Application for Amusement Ride Inspector Certification

Application to be certified as an amusement ride inspector.



Formulario
F500-065-000
 
Application for Certificate of Competency as an Inspector of Pressure Retaining Items

To apply for a certificate of competency as an Inspector of Pressure Retaining items. You can only mail or fax this form to L&I. Emailed forms are not accepted. NOTE: Applications MUST be received no later than 30 days prior to the exam date. Incomplete applications WILL NOT be accepted.



Formulario
F620-040-000
 
Chief Inspector Clarification and Interpretation Request Form

Form is used to ask the Chief Inspector to consider written requests for clarification and interpretation to the definitions, rules and regulations in WAC 296-104. Thsi form must be completed before F620-017-000 Board of Boiler Rules Interpretation and Revision Request form can be submitted.



Formulario
F620-056-000
 
Affidavit for Amusement Rides

Affidavit of experience to apply for cetification as a Amusement Ride Inspector.



Formulario
F500-066-000
 
Non-Compliance Report - Boiler & Pressure Vessel Inspection

Used by L&I inspectors when a boiler or pressure vessel does not pass inspection. You can only mail or fax this form to L&I. E-mailed forms are NOT accepted.



Formulario
F620-012-000
 
Board of Boiler Rules Interpretation and Revision Request Form

Used to submit written requests for interpretations and revisions to the definitions, rules and regulations found in WAC 296-104. These must be submitted 45 days prior to the Board of Boiler Rules Meeting date. F620-056-000 Chief Inspector Clarification and Interpretation Request Form must be submitted before using this form.



Formulario
F620-017-000
 
Shop and Field Inspection Report

Used by L&I inspectors when they inspect boilers.



Formulario
F620-027-000
 
Historical Boilers Inspection Guideline

Inspection sheet for boiler inspectors. 4 pages.



Formulario
F620-043-000
 
Pre-Inspection Checklist for Hot Water Heating or Hot Water Supply Boilers

Checklist which reflects the most common violations encountered by Field Inspectors. This checklist should be gone through prior to requesting inspection of Hot Water Heating or Hot Water Supply Boilers



Checklist
F620-050-000
 
Pre-Inspection Checklist for Potable Water Heaters - ASME "HLW" Stamped Water Heaters

Checklist which reflects the most common violations found by Field Inspectors. This checklist should be gone through prior to calling for an inspection of Potable Water Heaters-HLW



Checklist
F620-051-000
 
Pre-Inspection Checklist for Low Pressure Steam Boilers

Checklist which reflects the most common violations found by Field Inspectors. This checklist should be gone through prior to calling for an inspection of Low Pressure Steam Boilers



Formulario
F620-052-000
 
Pre-Inspection Checklist for High Pressure Boilers

Checklist which reflects the most common violations found by Field Inspectors. This checklist should be gone through prior to calling for an inspection of High Pressure Boilers



Formulario
F620-053-000
 
Elevator Five-Year Safety Test Report

This report is used by elevator company mechanics and left on the job site for review by elevator inspectors.



Formulario
F621-051-000
 
Electric / Gas Conversion Pre-Inspection Checklist

This checklist is generic in content and may not include all requirements for your particular installation. The manufacturer's installation instruction must be adhered to and available to the inspector at the time of the inspection.



Formulario
F622-013-000
 
Gas Piping Test Affidavit

You fill out, print and make a copy of this form on your company's letterhead. This affidavit must be available for the L&I inspector when the inspection is made.



Formulario
F622-048-000
 
Roof Affidavit and Structural Inspection Request

The purpose of the manufactured home roof affidavit is to provide timely inspections and communications between the contractor and/or owner and FAS inspectors and field staff.

A structural inspection request questionnaire will not be required when a roof change out occurs if no structural changes are made in the roof sub-surface and roof cavity. Example: Repairing or replacing the roof trusses, rafters, ridge beam and the replacement of not more than (4) 4’x 8’ of roof sheathing.



Formulario
F622-076-000
 
Board of Boiler Rules Extension of Inspection Frequency Request Form

Board of Boiler Rules Extension of Inspection Frequency Request Form



Formulario
F620-055-000
 
Inservice Inspection checklist

Inservice Inspection checklist for power boilers, low pressure boilers, pressure vessels, and hot water boilers.



Formulario
F620-060-000
 





End of main content, page footer follows.

Access Washington en Español

© Depto. de Labor e Industrias del Estado de Washington. El uso de éste sitio del Internet está sujeto a las leyes del Estado de Washington.