This checklist is designed to be generic in content and may not include all requirements for your particular installation.

Checklist for homeowners on how to upgrade their pre-HUD homes to approach the HUD standards in the area of fire safety.

Checklist for homeowners on how to upgrade their pre-HUD homes to approach the HUD standards in the area of fire safety.

Used to apply for an official insignia for conversion vendor or medical unit factory-assembled structures. See sample form for instructions about how to fill out the form correctly.

Pamphlet/booklet: Explains structured settlement and provides an overview of eligibility and the application and approval processes. The audience for this pamphlet is injured workers who might be eligible.

Listing of Connected Loads and the Demand Loads. Used for all appliances that are fastened in place, permanently connected on specific circuit. Single Phase Panel Schedule and Three Phase Panel Scheule inlcude. Sample diagram included.

A form to request a refund for an electrical work permit, elevator permit, or factory-assembled structure alteration permit.

Used in requesting a plan approval for Conversion Vendor or Medical Unit factory-assembled structures.

The purpose of the manufactured home roof affidavit is to provide timely inspections and communications between the contractor and/or owner and FAS inspectors and field staff.

A structural inspection request questionnaire will not be required when a roof change out occurs if no structural changes are made in the roof sub-surface and roof cavity. Example: Repairing or replacing the roof trusses, rafters, ridge beam and the replacement of not more than (4) 4’x 8’ of roof sheathing.

Construction work shall mean and include all or any part of excavation, construction, erection, alteration, repair, demolition, and dismantling, of buildings and other structures.

Pamphlet: Summarizes the safety rules for rollover protective structures (ROPS) and seatbelts on tractors. Also lists exemptions and provides other information about safe operation of tractors.

Pre-Inspection Checklist to assist vendor owners, manufacturers, and others on what they need to know to get their vendor/medical unit approved by Labor and Industries.

You must have a contractor license number or have completed an application for a miscellaneous account to use this form.

This checklist is used by the contractor when altering a polybutylene re-pipe. Be sure you can answer YES to all questions before calling L&I for an inspection.

Checklist used by the contractor when altering a low slope roof.

To apply for a decal for an amusement ride or air supported structure.

Manufacturer uses this form to apply for an official insignia for commercial coaches that have a plan approval number.

Manufacturers uses this form to apply for an official insignia for a factory-built structure that has a plan approval number.

To apply for an insignia for a recreational vehicle.

Use to establish a factory assembled structure (FAS) deposit account. FAS deposit accounts are for businesses or other entities that are not currently licensed or registered with L&I as electrical or construction contractors but are legally required to purchase work permits from L&I. (3 pgs)

Description: This guide details the HIPAA ASC X12N 005010 format structure for EDI and provides information regarding electronic billing To the department via Provider Express Billing (PEB)

This checklist is used by the contractor when installing gas lines with copper tubing. Be sure you can answer YES to all questions before calling L&I for an inspection.

This document shows the steps to decertify a manufactured or mobile home.

This checklist is generic in content and may not include all requirements for your particular installation. The manufacturer's installation instruction must be adhered to and available to the inspector at the time of the inspection.

Used by the manufacturer to request approval from L&I on an eletrical plan to build factory-built structures or commercial coaches.

Used by a homeowner or contactor to request a field inspection for an alteration to a manufactured or mobile home.

Checklist on how to repair a flood damaged manufactured home. After the contractor has done all that is required by the checklist they call L&I for an inspection.

You fill out, print and make a copy of this form on your company's letterhead. This affidavit must be available for the L&I inspector when the inspection is made.

This checklist is used by the contractor when installing gas room heaters. Be sure you can answer YES to all questions before calling L&I for an inspection.

This guide details the HCFA proprietary format structure and provides information regarding electronic billing to the department via Provider Express Billing (PEB).

This variance request applies only to the installations performed by a previous owner and does not apply to any home during the warranty period.

Continuation sheet to apply for an insignia.

Pamphlet/booklet: Explains structured settlement and provides an overview of eligibility and the application and approval processes. The audience for this pamphlet is injured workers who might be eligible.

If your home has any of the items in this document, it is a manufactured / mobile home and requires inspections for all alterations by L&I's Factory Assembled Structures Section.

This checklist is designed to be generic in content and may not include all requirements for your particular installation.

Manufactured Home Installer Certification Tag Order form

Manufactured Home Installer Certification Tag Transfer Request form

Manufactured Home Installer's Monthly Certification Tag Report

For use on sidewalls only. Maximum of one new opening up to 11-6 wide per sidewall. Edge of opening to be no closer than 4 from end of sidewall.

L&I sends this form to notify the local agencies when a factory-built structure is being shipped within a county or city limits.

This guide details the HIPAA ASC X12N 004010 format structure for 835 Pharmacy Remittance Advice and provides information regarding electronic billing to the department via Provider Express billing (PEB)

A manufacturer of factory-built structures and/or commercial coaches uses this form to submit plans to L&I for review.

Plans to build recreational vehicles or park trailers need approval from L&I. This form is used as part of the approval process.

Pamphlet/booklet: Explains the risks of lead exposure for workers who work on outdoor steel structures, and harmful effects on workers and their families. It includes a poster about the importance of safe work practices and procedures.

Generic Checklist to determine if the particular installation includes all requirements prior to calling for an inspection. Must be able to answer YES to all questions prior to calling.

Scaffolds, Chapter 296-874 WAC, applies to suspended and supported scaffolds, including their supporting structure and anchorage points. A scaffold is a temporary elevated platform, including its supporting structure and anchorage points, used for supporting employees or materials. A suspended scaffold is one or more platforms suspended from an overhead structure by ropes or other non-rigid means.

This checklist is used by the contractor when installing steel or wrought-iron gas line. Be sure you can answer YES to all questions before calling L&I for an inspection.

Structural Inspection Request Questionnaire

Pamphlet/booklet: Explains structured settlement and provides an overview of eligibility and the application and approval processes. The audience for this pamphlet is self-insured employers. Employers covered by the state's workers' compensation program should read Publication F240-004-000.

Pamphlet/booklet: Explains structured settlement and provides an overview of eligibility and the application and approval processes. The audience for this pamphlet is employers covered by the state's workers' compensation program. Self-insured employers should read Publication F240-005-000.

This guide details the HIPAA ASC X12N 004010 format structure for EDI and provides information regarding electronic billing to the department via Provider Express billing (PEB).

Pamphlet: Summarizes the safety rules for rollover protective structures (ROPS) and seatbelts on tractors. Also lists exemptions and provides other information about safe operation of tractors.

Used by the bond company to show a change in the business structure of a contractor's business.

This checklist is designed to be generic in content and may not include all requirements for your particular installation.

Pamphlet/booklet: Covers things you should consider when altering your home. Defines what is meant by alteration, repair and replacement and includes tips for hiring a registered contractor. It also includes contact information for L&I Consumer Assistance Program for owners of new manufactured/mobile homes.

Pamphlet/booklet: Covers things you should consider when altering your home. Defines what is meant by alteration, repair and replacement and includes tips for hiring a registered contractor. It also includes contact information for L&I Consumer Assistance Program for owners of new manufactured/mobile homes.