| Conversion Vendor & Medical Units: Inspections |  | |
L&I must inspect and approve your converted vendor or medical unit
Use this helpful checklist first
Once the work has been completed on your unit, go over this Vendor / Medical Conversion Units Pre-Inspection Checklist (124 KB PDF) before requesting an inspection to make sure everything is complete.
Call L&I to schedule an inspection
Then, contact the nearest L&I office to make an inspection appointment with a Construction Compliance Inspector.
There will typically be two inspections:
- Cover Inspection - one just before the walls and roof are concealed by the interior finish material when all of the electrical wiring, plumbing and other elements are in place; and
- Final Inspection - when the unit is completely finished and ready to go down the road.
Be sure to give the inspector a copy of the approved plans/design so they can inspect the structure.
Some of the fees you will be charged:
- Travel time and inspection time at an hourly rate.
- Mileage.
To help estimate your costs, view the fee schedule. Fees can vary, however, depending on what you are doing. Call your local L&I office to request the fees specific to your job.
Once your unit is approved
Upon completion of the Final Inspection, the inspector will affix the Conversion Vendor / Medical Unit Insignia to the outside of the unit to show approval by L&I. This insignia must be maintained as a permanent record of L&I's approval.
Conversion Vendor & Medical Unit Insignia
If you should have questions or need additional assistance, you may contact the Plan Review Supervisor at 360-902-5218.
