Manufactured homes in Washington must be installed by an L&I certified installer. Installation work includes all aspects of installing the home, starting with the construction of the foundation, through assembly of the home, connecting the home to utilities and the application of the skirting.
Submit an application and pay the fee
- The Installer Training and Certification Application Form (F622-086-000) must be filled out and mailed with payment to the address shown on the form.
- Applications must be received by the application cut-off date. Early application is encouraged. Applications received after the cut-off date may be scheduled for the next available class due to time and/or class size limitations.
- Applicants will not be registered for the certification training and examination until their application has been approved.
Application & fees
|Type of Fee||Fee|
|Application Fee - Training, Exam, Certification (manual included)||$270.40|
|Application Fee - Training Only (manual included)||$135.20|
|Retake Failed Exam & Training||$40.50|
|Continuing Education Class||$54.00|
|Training Manual on Flash drive||$13.50|
Take the training and pass the exam
The Mobile/Manufactured Home Installer Training Course is a comprehensive course held over 1.5 days, including a 2-hour examination. Courses are held a minimum of 4 times throughout the year.
About the examination
The certification examination is given at the end of the second day of training. It is an open-book examination covering material addressed in the installer training course.
A score of 70% or higher is required for certification. Applicants receiving a passing grade on the examination will become certified Washington State manufactured home installers. An installer certification license will be issued.
Auditing the training course
Anyone may attend the training class without taking the examination for certification. “Training Only” is offered at a reduced cost and attendees receive a certificate of attendance. This option is particularly useful for individuals who would like specific knowledge about installation but do not need certification.
Manufactured/Mobile Home Installer Training/Examination Schedule (All classes will be held at the local L&I office unless otherwise noted)
|Class Dates||Location||Class Times||Application Cutoff Date|
|Oct. 8-9, 2019||L&I Yakima Office
15 W Yakima Ave Suite 100 Yakima WA 98902
|Day 1: 8 a.m. to 5p.m.
Day 2: 8 a.m. to noon
|Oct. 1, 2019|
|March 10-11, 2020||L&I Tumwater Office
7273 Linderson Way SW Tumwater WA 98504
|Day 1: 8 a.m. to 5p.m.
Day 2: 8 a.m. to noon
|March 2, 2020|
Note: Day 1 consists of registration sign-in, issuance of installer training manual, and training. Day 2 consists of training completion and a 2-hour exam.
Application and payment must be received no later than the cutoff date for the class requested. Applications received after the cutoff date may be scheduled for the next available class due to time and/or class size limitations.
Installer certification must be renewed every 3 years
Certified installers must do the following prior to expiration of their certificate:
- Complete the required four hours of continuing education.
- Apply for certification renewal. Manufactured Home Installer Continuing Education Registration Form (F622-087-000).
- Pay your renewal fee.
Pay your renewal fee online.
A renewal notice and application form will be mailed to each installer approximately 45 days prior to their expiration date. The renewal application and payment must be received by L&I on or before the installer's certification expiration date.
A certified installer who fails to do this must reapply for installer training and certification and meet all requirements for certification.
Installer Certification Renewal Form (F622-085-000)
Continuing education is required for renewal
Installer certification is valid for 3 years. Certified installers must attend a continuing education course to qualify for certification renewal. Certified installers must complete their required continuing education and the renewal application process prior to expiration of their certificate.
Continuing education classes available
- L&I's Continuing Education (listed in the schedule below) — use this form to register:
Manufactured Home Installer Continuing Education Registration Form (F622-087-000)
- Continuing education credit is available at some L&I Contractor Training Days.
- Installers who are unable to attend a continuing education class may attend a regularly scheduled installer training class and receive continuing education credit.
Manufactured/Mobile Home Installer Continuing Education Schedule
(All classes will be held at the local L&I office unless otherwise noted.)
|Class Date||Location||Class Time||Registration Cutoff Date|
|October 10, 2019||L&I Yakima Office
15 W Yakima Ave Suite 100
Yakima, WA 98902
|8 a.m to noon||October 9, 2019|
Certified Installers must apply their WAINS label to any manufactured home they install and may be purchased by completing the application and submitting with the fee. Usage is reported monthly to the department. Labels are assigned to individual Installers and may not be used by anyone else or transferred without submitting a completed form to L&I.
Forms for installers
- Manufactured Home Installer Certification Tag Order Form (F622-077-000).
- Manufactured Home Installer's Monthly Certification Tag Report (F622-078-000).
- Manufactured Home Installer Certification Tag Transfer Request Form (F622-079-000).
Verify your installer — Ask to see their certified manufactured home installer card or certificate with their certification number and verify the expiration date. Or you can verify your certified installer using our online tool.
Any individual or company that is paid to install a manufactured or mobile home must be certified to perform the installation (RCW 43.22A). This includes dealers, manufactured or mobile home park owners, and contractors.
Supervision & installer certification tag requirements
A certified manufactured home installer must be on site at all times during each phase of installation. Different installers can supervise each phase of installation. Licensed plumbers or electricians working within the scope of their license do not need additional supervision or certification.
Certified manufactured home installers must place a red metallic Washington Installer (WAINS) certification tag, issued by L&I, on each home they install before it is inspected by the local jurisdiction. This tag must list all installation work performed by the installer. One tag is required for each installer. For example, if one installer sets the forms and pours the concrete runners and another installer performs all other installation work, there should be two tags affixed to the home. These tags should be placed directly above or below the HUD certification label, or temporarily located in plain sight within 3 feet of the home's front entry. Tags can only be removed by the homeowner after the local enforcement agency has issued its final approval.
Manufactured and mobile homes in Washington State must meet the installation requirements of WAC 296-150I.
New manufactured homes must be installed according to the manufacturer's instructions or the specific instructions of an engineer or architect licensed in Washington. These specific instructions do not need to address the entire installation - the manufacturer's installation instructions can be used for other installation aspects. If neither the manufacturer's installation instructions nor the specific instructions cover all aspects of installation, it must comply with the requirements of WAC 296-150I-0310.
Relocated manufactured and mobile homes
If the home manufacturer's original installation instructions are unavailable, relocated homes can be installed according to the specifications of the Manufactured Housing Construction and Safety Standards (MHCSS 3285) or the specific instructions of an engineer or architect licensed in Washington. For information on where to obtain a copy of MHCSS 3285, contact our Factory Assembled Structures toll-free automated services line at 1-800-705-1411 (Option 3).
Local City and County Requirements
The installation of all manufactured/mobile homes are inspected under permits issued by the local cities and counties. Cities and counties enforce the manufactured home installation rules per RCW 43.22.440. The manufacture set up manual for new homes must be available for the local building inspector to use. For relocated homes, if the set up manual is not available, the requirements in MHCSS 3285 or instructions approved by a Washington registered professional engineer must be used.
The local building department may set installation requirements for: flood plains, hazardous areas, earthquake protection, frost line, soil bearing, noise control, fire sprinklers, wildfire protection, and snow loads. The local building jurisdictions must provide options for meeting the snow load requirement. All structures in the jurisdictions must meet the same requirements.
A installation checklist for local building inspectors can be obtained by contacting the Installer program at 1-800-705-1411 Option 3 or email FAS1@Lni.wa.gov.
Alterations to new and relocated homes are inspected by L&I. Alteration permit information can be found on our website. Auxiliary structures such as porches, decks, garages and room additions built next to the manufactured home require permits from the local building department. When auxiliary structures impose additional loads on the manufactured home a permit from L&I is required for the load bearing changes.
State Laws and Rules for Manufactured/Mobile Homes
RCW 43.22 Sections 335-495 — Manufactured/mobile homes, factory-assembled structures.
RCW 43.22A — Mobile and Manufactured Home Installation.
WAC 296-150I — Manufactured Home Installer Training and Certification Program, Installation Code.
WAC 296-150M — WA Manufactured Home Code.